YACHT ENAMEL 

Epifanes Yacht Enamel (one-component)

A high gloss, one-component, alkyd-based, traditional marine finish. This enamel has very good flowing and covering properties and provides long lasting gloss retention and excellent weather durability.

Application
Fiberglass - steel - wood - aluminium: suitable for interior and exterior use above the waterline in combination with the appropriate primer. Maintenance of existing one and two-component systems regardless of brand.

MONO-URETHANE YACHT PAINT 

Epifanes Mono-urethane Yacht Paint (1-comp.)

A hard, one-component, air-drying, high gloss finish paint based on urethane/alkyd resins. Provides superior covering and filling, long lasting weather durability and high gloss retention. Offers rapid initial curing.

Application
Fiberglass - steel - wood - aluminium: suitable for interior and exterior use above the waterline in conjunction with the appropriate primer or directly on well degreased and sanded fiberglass. Maintenance of existing one and two component systems regardless of brand.

POLY-URETHANE YACHT COATING 

Epifanes Poly-urethane Yacht Coating (2-comp.)

A high gloss, two-component, polyester saturated, aliphatic urethane coating. Scratch resistant, excellent outdoor durability and weather resistance. Finish provides perfect flow and easy application by brush, roller or spray.

 

Application
Fiberglass - steel - wood - aluminium: suitable for interior and exterior use above the waterline in conjunction with the appropriate primer or directly on well degreased and sanded fiberglass.
Maintenance of existing two-component systems regardless of brand.

NAUTIFORTE | EPIFANES UK

Epifanes Nautiforte Yacht Paint (one-comp.)

A high gloss one-component finish based on siliconized alkyd resins. This finish provides outstanding weather durability, long lasting gloss retention, rapid wet film drying, minimal dirt retention and is non-yellowing.

 

Application
Fiberglass - steel - wood - aluminium: suitable for interior and exterior use above the waterline in conjunction with the appropriate primer or directly on well degreased and sanded fiberglass. Maintenance of existing one and two component systems regardless of brand.

NONSKID DECKCOATING

Epifanes Non-skid Deck Coating (1-comp.)

A one-component, semi-gloss, urethane/alkyd based non-skid
deck paint containing a measured amount of polypropylene beads as the non-skid agent. To ensure best water resistance, apply Non-skid Deck Coating over at least 2 high gloss coats. Application by shorthaired roller provides an even distribution of the beads. Stir well before and during use. Allow the final coat at least 72 hours to harden thoroughly.

Application
Fiberglass - steel - wood - aluminium: as non-skid finishing deck coating on full one-component paint systems. Maintenance
of existing non-skid paint systems regardless of brand.

MULTIFORTE

Epifanes Multiforte

A one-component, semi-gloss topcoat based on a special combination of medium oil alkyd/urethane resin reinforced with acrylic copolymer. Provides rapid drying and excellent adhesion. Recommended for use on steel surfaces where a highly abrasion resistant top coat is required, such as decks, deck-houses, gangways and derricks. For new work on bare steel in conjunction with anticorrosive primers such as Epifanes Multi Marine Primer or Epifanes Metal primer and maintenance of existing, intact one-component paint systems.

Application

Fiberglass - steel - wood - aluminium: For new work above the waterline in conjunction with appropriate primer (e.g., Epifanes Multi Marine Primer). Maintenance of existing, intact one-component paint systems..